domingo, 1 de novembro de 2009

Hydrogen Generator V1

I ended up moving to next project:

-Hydrogen Generator

well it works as simple, there must be a reservoir where chemical reactions occur, so the gas that is directed through the tube will go to a camera of water where the gas will be cleaned of waste (water vapor, acid, and others .. .) immediately after the clean gas going up by another tube to be connected to a kind of a "protector of the explosion" that will prevent that it explodes.
then it will end in a valve that can be used for many things.

the result is hydrogen gas 99%


all the material should cost about 44$

(Click the image for better quality)

red line shows trajectory of the blast, as you can see in the event of an accident does not occur destructive explosion, just a boom that will not cause any damage

if not protective camera explosion followed by a tube up to the camera separation of gas.
If this does happen next that could explode with much more force that could jeopardize their health

sábado, 1 de agosto de 2009

Project running - Coilgun (FAILED)

After the last attempt to make a coilgun had lack of power, which has resulted in the tesla gun (or Tesar).

Now I will try coilgun outravez but the way different =). I hope that results:















After several attempts the result was not as he had expected.
Yes it worked but the acceleration was very low, so I eventually discourages this project.
but soon I will do a better one = D
thanks for the attention ^ ^

quinta-feira, 23 de julho de 2009

How to make paper fuse without KNO3 (Potassium nitrate)




Well, I do not know if someone did this, but it works perfectly for me to test some experience. I hope you enjoy =)

Materials used:
- Matches
- Water
- microwave oven
- paper (the best is the newspapers)

Method of preparation:

1 - get the heads of matches
2 - softens with any object to become a fine powder
3 - could join with water in the ratio of -> 2 / 4 powder for 1 / 4 water
4 - wet piece of paper that mixture
5 - now have to dry the paper. for more security you can dry in the sun but I even in the microwave because it is faster.
6 - Got it! can now do everything we want with it. He must have a color similar to the matches. it has no repeat method until 4 and 5 have similar color. can now make a fuse or a smoke bomb =)

Take CARE =)

quarta-feira, 22 de julho de 2009

Simple touch bomb



Materials used:
- A package of matches (the best are brown)
- Adhesive tape
- Cotton
after that, completely covering adhesive tape box with a lot BUT VERY CAREFULLY

Homemade tesla gun



Materials used:

- Sheets of iron
- 9 cells from 9V
- Capacitor 20uf 450V for
- Switch
- And other things (glue, wire, hammer ...)

Music - Gorilaz 19-2000

Ok let's start

I created this blog for people who want to give some questions of my videos and want to give some ideas

Here I will bring advanced information of how music, videos, programs, materials ...

Of course, here we can give ideas for future videos!